04.24.24
New fibers continue to be developed for a wide range of technical textile applications. Currently, they include fibers based on organic or recycled feedstocks to meet sustainability targets and others with new functional properties for advanced high-performance applications. Many of them are being showcased at Techtextil 2024.
The development of specific multifilaments, monofilaments and nonwovens for niche fiber applications – over 70 to date – is very much the specialist field of BTMA member Fibre Extrusion Technologies (FET), along with designing the bespoke fiber extrusion and spunbond and meltblown nonwoven systems to successfully produce them.
Following the opening of its expanded Fibre Development Centre with considerably enhanced facilities more than doubling capacity and increasing efficiency at the start of 2023, FET, which is at stand A84 in Hall 12 at Techtextil has significantly accelerated the number of technical trials it has conducted for clients.
“We work closely in collaboration with customers ranging from huge multinationals to start-ups and spin-out companies,” explains FET managing director Richard Slack. “At present we’re doing a lot of work with biopolymers and recycled fibers because they all have different characteristics and behaviors and need specific handling and processing parameters, but we specialize in processing challenging materials.
“Another area we’re heavily involved in is in medical devices where there’s a lot of interest in resorbable products and how to influence absorption. Producers are looking at how to enhance the durability of implantables, for example, which would be advantageous in specific surgical procedures,” he adds. “In terms of new high-performance products, one example we’re currently working on is hollow fibers, not from conventional polymers but from high-temperature engineering polymers such as PEEK, as well as small-scale nonwovens from engineered polymers for applications such as filtration.
“We’re also investigating the potential of certain olefins to achieve the high-strength and other desirable properties of ultra-high molecular weight polyethylene – UHMWPE. At present UHMWPE’s availability is dependent on being able to order in tons, but there is a lot of demand for lower quantities for tailored small-scale projects, and we see much potential in an olefin with a long molecular chain that we believe could potentially meet 80-90% of this market’s needs.”
Pneumatic yarn splicing is a clever process established in the textile industry for joining yarns and works by intermingling individual filaments closely together, to make joint which are stronger and flatter than knots.
The patented splicers in Airbond’s latest range are 3D printed, making them both lighter and stronger, and now enable the splicing of yarns in sizes of up to 16,000 tex – compared to the 1,200 tex most splicing machines can handle.
“Understanding the physics behind splicing has enabled us to change the characteristics of the air in the splicing of fragile or ultra-large yarns,” explains Airbond research engineer Carwyn Webb. “We have increased the limits of normal splicers by a factor of ten, which will enable a huge reduction in expensive waste.”
The precise detection of faults during the production of technical fabrics has meanwhile recently been significantly advanced with the introduction of the latest WebSpector automated fabric inspection system by Shelton Vision (Hall 12, stand E54)
Building on its market leading vision system for plain, single color textiles, Shelton’s patent-pending image processing techniques now recognize and adapt to complex patterns – even those on fabrics with significant distortion and deformation.
“While sustainability is without doubt driving the agenda these days, there’s always a demand for new feedstocks and fibers that add new functionality, as well as sophisticated new technologies for processing them and exploiting their advantages,” says BTMA CEO Jason Kent. “Techtextil is an essential show for many BTMA members and we see growing opportunities in a number of rapidly expanding markets with exponential growth for our members.”
Founded in 1940, the British Textile Machinery Association actively promotes British textile machinery manufacturers and their products to the world. The non-profit organization acts as a bridge between its members and the increasingly diverse industries within the textile manufacturing sector.
The development of specific multifilaments, monofilaments and nonwovens for niche fiber applications – over 70 to date – is very much the specialist field of BTMA member Fibre Extrusion Technologies (FET), along with designing the bespoke fiber extrusion and spunbond and meltblown nonwoven systems to successfully produce them.
Following the opening of its expanded Fibre Development Centre with considerably enhanced facilities more than doubling capacity and increasing efficiency at the start of 2023, FET, which is at stand A84 in Hall 12 at Techtextil has significantly accelerated the number of technical trials it has conducted for clients.
“We work closely in collaboration with customers ranging from huge multinationals to start-ups and spin-out companies,” explains FET managing director Richard Slack. “At present we’re doing a lot of work with biopolymers and recycled fibers because they all have different characteristics and behaviors and need specific handling and processing parameters, but we specialize in processing challenging materials.
“Another area we’re heavily involved in is in medical devices where there’s a lot of interest in resorbable products and how to influence absorption. Producers are looking at how to enhance the durability of implantables, for example, which would be advantageous in specific surgical procedures,” he adds. “In terms of new high-performance products, one example we’re currently working on is hollow fibers, not from conventional polymers but from high-temperature engineering polymers such as PEEK, as well as small-scale nonwovens from engineered polymers for applications such as filtration.
“We’re also investigating the potential of certain olefins to achieve the high-strength and other desirable properties of ultra-high molecular weight polyethylene – UHMWPE. At present UHMWPE’s availability is dependent on being able to order in tons, but there is a lot of demand for lower quantities for tailored small-scale projects, and we see much potential in an olefin with a long molecular chain that we believe could potentially meet 80-90% of this market’s needs.”
Splicing
Resource efficiency in the processing of extremely expensive fibrer like UHMPWE, or carbon and aramids, is a key benefit of the latest splicing technologies of Airbond (Hall 12, stand E31).Pneumatic yarn splicing is a clever process established in the textile industry for joining yarns and works by intermingling individual filaments closely together, to make joint which are stronger and flatter than knots.
The patented splicers in Airbond’s latest range are 3D printed, making them both lighter and stronger, and now enable the splicing of yarns in sizes of up to 16,000 tex – compared to the 1,200 tex most splicing machines can handle.
“Understanding the physics behind splicing has enabled us to change the characteristics of the air in the splicing of fragile or ultra-large yarns,” explains Airbond research engineer Carwyn Webb. “We have increased the limits of normal splicers by a factor of ten, which will enable a huge reduction in expensive waste.”
Testing and fault detection
Sophisticated systems for the testing of fiber and advanced materials will also be showcased by BTMA members James Heal (Hall 12, stand A40 at Techtextil 2024) and Verivide (Hall 12, stand A70), both of whom have established strong ties with major producers of technical textiles over many years.The precise detection of faults during the production of technical fabrics has meanwhile recently been significantly advanced with the introduction of the latest WebSpector automated fabric inspection system by Shelton Vision (Hall 12, stand E54)
Building on its market leading vision system for plain, single color textiles, Shelton’s patent-pending image processing techniques now recognize and adapt to complex patterns – even those on fabrics with significant distortion and deformation.
Sophistication
Other BTMA members who will be exhibiting at Techtextil 2024 include Avocet (Hall 11, stand B25) the manufacturer of Cetaflam high pe-formance flame retardant (FR) chemicals, Ascotex (Hall 12, stand B41) a specialist in the development and application of yarn guides, and Vandewiele UK (Hall 12, stand D20) the UK arm of Bonas Textile Machinery specialisinz in high capacity jacquard technology for the weaving industry.“While sustainability is without doubt driving the agenda these days, there’s always a demand for new feedstocks and fibers that add new functionality, as well as sophisticated new technologies for processing them and exploiting their advantages,” says BTMA CEO Jason Kent. “Techtextil is an essential show for many BTMA members and we see growing opportunities in a number of rapidly expanding markets with exponential growth for our members.”
Founded in 1940, the British Textile Machinery Association actively promotes British textile machinery manufacturers and their products to the world. The non-profit organization acts as a bridge between its members and the increasingly diverse industries within the textile manufacturing sector.
