07.11.23
In his Master's thesis, Flávio André Marter Diniz, a graduate of the Institut für Textiltechnik of RWTH Aachen University (ITA), developed ultra-thin polyethylene (PE) carbon fibers with a filament diameter two to three times smaller than usual. In addition, the use of PE-based precursors will make it possible to reduce the price of carbon fibers by 50% in the future, thus opening up a wide range of other possible applications in key industries such as wind power, aerospace and automotive. For this groundbreaking development, Marter Diniz was awarded the Hanns Voith Prize on June 23 by Professor Dr mult. Sigmar Wittig with the Hanns Voith Foundation Award in the category "New Materials." The prize is endowed with €5,000 in prize money.
Marter Diniz won the prize in the category "New Materials" for his master thesis entitled "Investigation of the stabilisation and carbonisation process for the production of ultra-thin polyethylene-based carbon fibres."
The use of carbon fibers in highly stressed lightweight construction solutions, such as today's growth applications of wind turbines or pressure tanks, has become indispensable due to their excellent mechanical properties and low density. High manufacturing costs of conventional PAN precursor-based carbon fibers make the material very cost-intensive. In addition, it is not sufficiently available. New manufacturing approaches that develop alternative raw materials and manufacturing processes can be a key and growth engine for further industrial composites applications.
The aim of the work was to develop a new and cost-effective manufacturing process for high-quality ultra-thin carbon fibers using a polyethylene precursor. For this purpose, the sulphonisation process, which is time-consuming today, was to be significantly shortened.
As a result, Marter Diniz produced novel ultra-thin polyethylene-based carbon fibers with a filament diameter < 3 μm with an excellent surface quality of the fibers without detectable structural defects. The fiber diameter is two to three times smaller than that of conventional PAN-based CF. This provides the basis for mechanically high-quality material properties. At the same time, Marter Diniz was able to reduce the sulphonisation time by 25%. The developed material and technology set important milestones on the way to cheaper carbon fibers. With PE-based precursors, the price of CF can be reduced by 50% compared to conventional PAN-based CF.
A total of five other young scientists were awarded in six categories: Drive Technology, Innovation & Technology/Artificial Intelligence, New Materials, Paper, Hydropower and Economic Sciences. This year, for the 10th time, the Hanns Voith Foundation awarded the Hanns Voith Prize to outstanding young scientists.
Marter Diniz won the prize in the category "New Materials" for his master thesis entitled "Investigation of the stabilisation and carbonisation process for the production of ultra-thin polyethylene-based carbon fibres."
The use of carbon fibers in highly stressed lightweight construction solutions, such as today's growth applications of wind turbines or pressure tanks, has become indispensable due to their excellent mechanical properties and low density. High manufacturing costs of conventional PAN precursor-based carbon fibers make the material very cost-intensive. In addition, it is not sufficiently available. New manufacturing approaches that develop alternative raw materials and manufacturing processes can be a key and growth engine for further industrial composites applications.
The aim of the work was to develop a new and cost-effective manufacturing process for high-quality ultra-thin carbon fibers using a polyethylene precursor. For this purpose, the sulphonisation process, which is time-consuming today, was to be significantly shortened.
As a result, Marter Diniz produced novel ultra-thin polyethylene-based carbon fibers with a filament diameter < 3 μm with an excellent surface quality of the fibers without detectable structural defects. The fiber diameter is two to three times smaller than that of conventional PAN-based CF. This provides the basis for mechanically high-quality material properties. At the same time, Marter Diniz was able to reduce the sulphonisation time by 25%. The developed material and technology set important milestones on the way to cheaper carbon fibers. With PE-based precursors, the price of CF can be reduced by 50% compared to conventional PAN-based CF.
A total of five other young scientists were awarded in six categories: Drive Technology, Innovation & Technology/Artificial Intelligence, New Materials, Paper, Hydropower and Economic Sciences. This year, for the 10th time, the Hanns Voith Foundation awarded the Hanns Voith Prize to outstanding young scientists.
