08.31.11
The scissors-like cutting action of the dual knife rotary design and the Maxson exclusive cutting clash adjustment greatly extends the knife life over conventional stationary bed knife cutters.
The cutting section includes knives mounted in upper and lower rotating cylinders. Using the exclusive clash arrangement, the operator can safely adjust the cross cutting blades while the cutter is running by transversely shifting the upper cylinder across the width of the cutter to increase clash. This allows the operator to improve cut quality while running the cutter.
Quick lock knife adjustments are used across the upper and lower knife cylinders to allow rapid removal and installation of steel rule blades. With this design, knife changes are completed within 20 minutes.
Capable of speeds of over 300 cuts per minute on an 11" cut off, the cutter can slit at multiple intervals across the web and can be custom designed to meet the special requirements of the abrasives converter. The cutting section includes a slitter rig that permits up to seven piles across the width of the sheeter.
401-596-0162
www.maxsonautomatic.com
Maxson's new specialty sheeter |
Quick lock knife adjustments are used across the upper and lower knife cylinders to allow rapid removal and installation of steel rule blades. With this design, knife changes are completed within 20 minutes.
Capable of speeds of over 300 cuts per minute on an 11" cut off, the cutter can slit at multiple intervals across the web and can be custom designed to meet the special requirements of the abrasives converter. The cutting section includes a slitter rig that permits up to seven piles across the width of the sheeter.
401-596-0162
www.maxsonautomatic.com