New Products


  • Rewinder Upgrade

    Upgrading a V-4 series rewinder to the new V-5  series can increase production speed and performance with easier set up and half the cost. Elsner Engineering is offering a special upgrade retrofit package for companies currently running an Elsne…
    07.18.06

  • Flame Retardant

    Vibatan's PP flame retardant 03281, developed by Viba Group, was specifically made for polypropylene with a very low halogen content. The advantage of this masterbatch is that if used at 2% in polypropylene, it gives to the end product V-2 (UL94) fir…
    07.18.06

  • Aqueous Resin

    ADMTronics has developed a new water-based aqueous resin, Santel 180-7H used to obtain high adhesion levels on both porous and non-porous surfaces. Once the product is applied to the dried substrate the surface becomes extremely durable and surpasses…
    07.18.06

  • Shaftless Inline Slitter

    The SML Winder 3000 is a turret-type shaftless inline slitter especially suitable for LLDPE stretch film. Production speeds up to 600 m/min can be achieved and a roll diamer of 400 mm for the production of jumbo rolls can be achieved. Because it elii…
    07.18.06

  • Engineering Resins

    GE Plastics has a number of new products for the aircraft interior industry. These high performance engineering resin and sheet materials will help aircraft OEMs develop next generation aircraft interior components. GE Plastics also offers an impress…
    07.18.06

  • Customer Trials

    TECHNOplants S.r.l. is offering customer trials using its new “V”-shaped AllRound Winder at its headquarters in Pistoia, Italy. The new winder may be used in conjunction with the company's combined slitting and cross-cutting unit to cut,…
    07.18.06

  • Information Guides

    Dow Corning has published two new Release System Information Guides for its Syl-Off brand tin-catalyzed silicone release coatings—one guide for solvent-based products and a second guide for emulsions. The company has also updated its selection…
    07.18.06

  • Lab Calender

    Herrmann Ultrasonics’ new ultrasonic lab  is now  available at  its North American  headquarters in Schaumburg, IL for  application development. The  nonwovens lab calender uses  ultrasonic bonding, embossing,…
    07.18.06

  • Measurement Control

    With the introduction of TDI (Total Distributed Intelligence), NDC Infrared Engineering has taken the next step forward in the evolution of on-line thickness measurement and control systems. Now every sensor and every scanning frame comes with its ow…
    06.14.06

  • Formulation Strategy

    Eastman Chemical Company is offering a new formulation strategy help tape and label manufacturers seek alternative ingredients for hotmelt pressure sensitive adhesives for packaging tapes and labels. These manufacturers have been seeking alternatives…
    06.14.06

  • Air Delivery System

    Maxson Automatic Machinery Company has developed an air delivery system that improves the pile quality on a sheeter's stacker. The design improves the press readiness of the stacked sheets by floating the cut packets out into the stacker's job box, s…
    06.14.06

  • Composite | Construction | Filtration

    Filter

    Filtration Group's FP-S Mini-Pleat V-Bank filter is constructed with a composite of synthetic filter materials and a high-impact, all plastic frame. This filter is designed to be reliable, lightweight and extremely strong. The FP-S's durable construc…
    06.14.06

  • Repelletizers

    Precision AirConvey will introduce a line of plastic repelletizers to enable plastic film processors to capture edge trim, roll scrap and other film waste, convert it to pellets and reintroduce it into the extrusion process in a closed reclamation lo…
    06.14.06

  • Environmentally Friendly Brand

    Jintex Yarns and Martex Fiber have introduced the innovative Eco2Cotton brand, giving companies the opportunity to produce an environmentally friendly, responsible cotton product while promoting their roles in reducing landfill waste and conserving w…
    06.14.06

  • Technical Yarns

    Tecnofilati, a member of the Gruppo Tessile Abati company, has recently shown the global textile market the brand Resistexae, its line of innovative technical yarns (containing percentages of carbon, copper, silver  and steel). The line includes…
    06.14.06

  • Adhesive

    Hernon Manufacturing has taken the excellent bond strength of Fusionbond structural adhesive and merged it with the simplicity of the ReAct  two-component, no-mix curing system to create ReAct 784. ReAct 784 is a structural adhesive designed for…
    06.14.06

  • Sheeter

    Maxson Automatic Machinery Company has developed a sheeter that allows vinyl extruders to realize maximum line speed potential when producing sheets in line. Using a dual knife rotary cutter technology, rather than a drop shear design, the sheeter ca…
    05.17.06

  • Coater

    The new CTL 4640 coater from Nordson Corporation enhances the company’s global laboratory capabilities to help customers accurately qualify nonwovens and web coating applications, hot melt adhesives and substrates in a controlled environment.&n…
    05.17.06

  • Edge Detector

    AccuWeb has introduced the WideArray Fusion, a patent pending edge detector that combines ultrasonic and infrared technologies in a dynamically compensated array edge detector. Designed for converters running a broad range of materials, the new Wide…
    05.17.06

  • Construction

    Air Service System

    The new Series AS3 FRLs from Rexroth fulfills high demands in terms of air preparation. The Air Service (AS) system has a modular construction and is comprised of filters, regulators, lubricators and accessory devices such as shut-off valves and dist…
    05.17.06