Sign up now to receive our weekly newsletter and more.
Mechanical Bonding
| Code: 6400103 1 x Fehrer pre-needle loom |
| Type: NL 9/S Width: 2000 mm YOC: 1993 EL: 380/3/50 |
| Pre needle loom with 1 500 needles/lm, hub 60 mm and 1 500 strokes/min. 1 set of spare needle boards is included. |
| Request further information |
| Code: 6400106 1 x Asselin pre-needle loom |
| Type: A50 Width: 2600 mm YOC: 1996 EL: 380/3/50 |
| Pre- needler with bat feed, 1600 stroke frequency, hub 60 mm, 3000 needles/meter and speed appr. 20 m/min |
| Request further information |
| Code: 6400107 1 x Asselin pre-needle loom |
| Type: DF 1500 Width: 5500 mm YOC: 1985 EL: 380/3/50 |
| hub 70 mm, max stroke frequency 750 |
| Request further information |
| Code: 6400109 2 x Asselin pre-needle loom |
| Type: A50S-SD2 Width: 3600 mm YOC: 1999 EL: 480/3/60 |
| downstroke, 2 boards, entry board 5000 n/lm and exit board 7000 needles/lm, 1500 strokes/min, 60 mm hub, with DCIN in-feed. |
| Request further information |
| Code: 6400111 1 x Automatex pre-needle loom |
| Type: PTR-50 Width: 3500 mm YOC: 1985 EL: 380/3/50 |
| single board, 5000 n/lm, 60 mm stroke length, 1200 strokes/min. Three sets of needle boards. A new (2012) AC motor and drive, several spare drive units. |
| Request further information |
641. finishing needle looms
| Code: 6410107 1 x Asselin finishing needle loom |
| Type: A50XFRS-SD2 Width: 2900 mm YOC: 2006 EL: 380/3/50 |
| double board, 11, 560 needles/lm (with different configuration between board one and board two), downstroke, with CBF, max stroke frequency 1200/min, 60 mm hub, speed 20 m/min. Only worked for 34,000 hours. |
| Request further information |
| Code: 6410109 1 x Asselin finishing needle loom |
| Type: SM35 2E Width: 3500 mm YOC: 1996 EL: 380/3/50 |
| up-stroke, double boards, total 9960 needles/lm, 1200 rpm, hub 50 mm, complete with control panel and 2 spare needle boards |
| Request further information |
| Code: 6410110 1 x Asselin finishing needle loom |
| Type: SD26 Width: 2600 mm YOC: 1991 EL: 380/3/50 |
| Finishing needle loom type SD 26, stroke amplitude 1600, hub 60 mm, 2 x 7 500 boards, 200 needles/sqcm. |
| Request further information |
| Code: 6410113 1 x Dilo finishing needle loom |
| Type: DI-LOOM UD-IIS60 Width: 6000 mm YOC: 1993 EL: 380/3/50 |
| upstroke, double board, 1800 strokes/min, 9640 needles/lm, 2 spare board sets, height of stroke 35mm, PLC Siemens Simatic S7 |
| Request further information |
| Code: 6410114 2 x Fehrer finishing needle loom |
| Type: NL 21 Width: 3300 mm YOC: 1985 EL: 380/3/50 |
| fully reconditioned in 2004, double board, downstroke, 10,000 needles/lm, 1200 strokes/min, 40 mm stroke. |
| Request further information |
642. structural needle looms
| Code: 6420102 1 x Dilo structural needle loom |
| Type: SD 45 Width: 4500 mm YOC: 1973 EL: 380/3/50 |
| For production of rib, velour and designed nonwovens. Single board, downstroke, 4200 needles/lm, max 800 strokes/min, 60 mm hub, complete with motor and two winding units as well as control panel and patterning device. |
| Request further information |
| Code: 6420103 1 x Dilo structural needle loom |
| Type: SV 45 Width: 4500 mm YOC: 1981 EL: 380/3/50 |
| including patterning device for rib and velour, 6192 needles per linear meter, with it's own control and electrical panels, speed 4,5 m/min, 2200 strokes/min, fully reconditioned by Dilo in 1998. New needle-boards installed in September 2012. |
| Request further information |
645. hydro-entangling machines
| Code: 6450001 1 x Courtaulds Research hydro-entangling machine |
| Type: Pilot spunlace line Width: 500 mm YOC: 1985 EL: 380/3/50 |
| 3 head hydro-entanglement unit plus pre-wetting unit consisting of: 1000 liter water-holding tank, priming pump, cartridge filter unit, compressed air/water stabilizer unit, high-pressure piston pump, single-head pre-wet, 3 jet boxes, air/water separator, transport belt unit, suction-fan arrangement, a range of aperture belts and jets strips. The pilot facility has been used to compare different compositional designs and assess processability. The hydro-entangling facility allows for the production of lengths of finished nonwoven fabric for onward assessment and gives some guidance as to the ultimate entangling performance of a specific fibre. The concepts can be made and tested for physical performance using normal testing equipment used for full-scale production. A reasonable correlation exists between the performance of the pilot hall prepared fabrics and full-scale production lines. Spunlace nonwoven fabrics can be prepared by taking carded webs with pre-selected fibre blends and basis weights, which are then fed into the hydro-entanglement unit. This allows the production of a finished spunlace nonwoven fabric, which will replicate a full-scale spunlace line. Hydro-entanglement pressure can be varied up to a pressure of 150 bar to give greater or lesser degrees of hydro-entanglement, creating finished webs of different strength and bulk characteristics. The pilot line has similar capabilities as a full-scale line in that there are a selection of available forming belts onto which the web is hydro-entangled. These replicate the types of pattern and aperture designs that can be achieved on a production line. The belts vary from a plain lacing pattern to different aperture designs and degree of openness. |
| Request further information |
| Code: 6450002 1 x Rieter hydro-entangling machine |
| Type: Perfojet Width: 3500 mm YOC: 1990 EL: 380/3/50 |
| max capacity 1000 kgs/hr, 12 jets and including pre-wetting station. Complete with pumps and bag filters. 3 big pumps with 4 injectors per pump for plain products, perforated products and hydroembossed products on belt with geometric design. |
| Request further information |
648. quilting machines
| Code: 6480001 1 x Meca quilting machine |
| Type: Ecostrass 115PB Width: 2800 mm YOC: 2004 EL: 380/3/50 |
| multi-needle and multi-purpose quilting machine for quilting, cording, taping. 3 needle-bars, 5 mm sequin application, with thread sensors and selvedge trimmers. Very versatile, able to do almost all imaginable quilt patterns (also applicable on cording/taping) and comes with it's own design library with thousands of designs. Condition is very good and machine is hardly used. |
| Request further information |
| Code: 6480003 1 x Meca quilting machine |
| Type: Eco Rding Width: 1600 mm YOC: 2003 EL: 380/3/50 |
| Multi needle m/c in excellent condition |
| Request further information |
| Code: 6480004 1 x Stutznecker quilting machine |
| Type: Mammuth Width: 4500 mm YOC: 2007 EL: 380/3/50 |
| Single needler with computer and software |
| Request further information |
