Breaking News

Vaopometer cup

February 29, 2012

Thwing-Albert Instrument Company has redesigned the Vapometer Cup for easier sample setup in the lab.

The original design of the Vapometer Cup used six knurled head screws to secure the flange in place.Now, customers can find relief with the elimination of the securing six individual screws.Thwing-Albert’s new 68-3000 EZ-Cup design consists of a lightweight aluminum cup and an aluminum threaded flanged ring with two neoprene gaskets with a Teflon seal that hold the specimen in place. This design was specifically created to eliminate edge leakage and to provide fast secure sealing of the specimen between the gaskets.Specimens are easily loaded and sealed in place by twisting the threaded upper aluminum flange in place.

Thwing-Albert Vapometer Cups comply with the ASTM E96 standard.Samples up to 3 mm (1/8 in.) thick can be tested with this Vapometer model.The cups are 63.5 mm (2.5 in.) wide and 50.8 mm (2 in.) deep.This model will save operator time and increase productivity by cutting the setup time in half.Serialization has been added to the Vapometer to allow test administrators to easily track results of multiple samples.

The Vapometer is used for determining the water vapor permeability of sheet materials such as wipes, specialty paper grades, polyethylene, building material, leather, weatherproof clothing, vinyl, foil, laminates and other thin sheet materials. This property is essential in determining if a material is moisture proof or has the ability to protect contents from the transmission of water vapor.
www.thwing-albert.com
856-767-1000



  • 2016 International Buyers Guide

    2016 International Buyers Guide

    July 15, 2016
    Our annual Buyers’ Guide lists nearly every supplier and producer involved with the global nonwovens industry.

  • Raw Material Round Up

    Raw Material Round Up

    Karen McIntyre, Editor||June 9, 2016
    Suppliers to nonwovens manufacturers continue to innovate.

  • Fiber Producers Hone in on Hygiene

    Fiber Producers Hone in on Hygiene

    Tara Olivo, Associate Editor||June 9, 2016
    Growth in hygiene markets has spurred innovation among these suppliers to the nonwovens industry.